maxxecu_pdm20--01.jpg
2098--maxxecu_pdm20--02.jpg
maxxecu_pdm20--01.jpg
2098--maxxecu_pdm20--02.jpg

MaxxECU PDM20

$2,450.00

The MaxxECU PDM20 is an advanced Power Distribution Module for MaxxECU units and is designed to replace fuses and relays in a modern way.

  • Max 230A.

  • 20 outputs (8x25A, 8x15A, 4x8A).

  • 7 digital / analog (0-24V) inputs.

  • All outputs can be PWM controlled.

  • Dedicated +5V power supply and sensor ground.

  • CAN bus for communication and setup management with MaxxECU MTune PC software.

  • Overcurrent protected adjustable levels with automatic restart with soft start option.

  • Warning levels for under / over currents.

  • Works with all MaxxECU devices.

  • Error code handling.

  • Support for CAN keypads.

  • Built-in energy saving mode that draws only 0.004A.

  • For high loads, outputs are connected in parallel.

Quantity:
Add To Cart

The MaxxECU PDM20 is an advanced Power Distribution Module for MaxxECU units and is designed to replace fuses and relays in a modern way.

  • Max 230A.

  • 20 outputs (8x25A, 8x15A, 4x8A).

  • 7 digital / analog (0-24V) inputs.

  • All outputs can be PWM controlled.

  • Dedicated +5V power supply and sensor ground.

  • CAN bus for communication and setup management with MaxxECU MTune PC software.

  • Overcurrent protected adjustable levels with automatic restart with soft start option.

  • Warning levels for under / over currents.

  • Works with all MaxxECU devices.

  • Error code handling.

  • Support for CAN keypads.

  • Built-in energy saving mode that draws only 0.004A.

  • For high loads, outputs are connected in parallel.

The MaxxECU PDM20 is an advanced Power Distribution Module for MaxxECU units and is designed to replace fuses and relays in a modern way.

  • Max 230A.

  • 20 outputs (8x25A, 8x15A, 4x8A).

  • 7 digital / analog (0-24V) inputs.

  • All outputs can be PWM controlled.

  • Dedicated +5V power supply and sensor ground.

  • CAN bus for communication and setup management with MaxxECU MTune PC software.

  • Overcurrent protected adjustable levels with automatic restart with soft start option.

  • Warning levels for under / over currents.

  • Works with all MaxxECU devices.

  • Error code handling.

  • Support for CAN keypads.

  • Built-in energy saving mode that draws only 0.004A.

  • For high loads, outputs are connected in parallel.